You can download today a new firmware file based on Android 7.1 and valid for the TV-Box MXQ PRO. A mediaplayer on the Amlogic S905W SoC, a Quad Core with ARM Cortex-A53 processors and a MALI-450mp5 GPU. It has 1GB of RAM, 8GB of eMMc storage memory and WiFi b/g/n with internal antenna (without Bluetooth). At connectivity level this box includes four USB 2.0 ports, SD card reader, HDMI 2.0 port, 10/100 network connector, digital audio output and finally an analog port for audio and video.
- Buy the MXQ PRO TV-Box with S905W SoC in Gearbest.com from $25.28 free shipping.
Update Process
- Download the Firmware MXQ PRO S905W SoC to update from PC (12-18-2017)
- Update the firmware following our Amlogic Update Guide
Changelog
- Not available
i have mxq-4k tv box both the light blue and red light is oning . no display is coming how to fix it
Reinstall the firmware using a PC.
how install firmware in the box
link for firmware to download it
Hi I have the MXQ pro 4k box and have downloaded the firmware MXQPRO_S905W_20171218 and and burn card maker 2.0.2. I have done the following. unzip the firmware as burn card cant read it if it is zipped. I then opened burn card and it only see the recovery file in the folder and so i try to mount it but it throws out an error. I have then opened the firmware and seen another folder inside that is zipped and unzipped it as well and tried again with burn maker and still does not work. What am i doing… Read more »
Hi.
Use the PC version, and the IMG file inside, read and follow the tutorial.
Have a nice day.
I need FIRMWARE MXQ PRO RAM 1G
Have a MXQ Pro 4K S905W V2.0 that when I try to flash the firmware it stops at 7% error disk something. tried so many times and the error is always the same. stuck in red light
Check that you use the correct firmware.
Try another PC.
If it persists, open dispute with your store.
Not working for me. I can see on my mainboard s905xq_v3.0 But i have this box. Any idea?
You need the exact firmware:
https://androidpctv.com/android-tvbox-minipc-solve-common-problems/
I know this Sir. But i can’t find the firmware for my board. I’m searching and trying since 5 days without succes.
Your shop can provide you a download link for exact firmware, please share the link to help others.
If don’t help you open a dispute and we say in the guide.
Low-cost boxes can change the hardware without notice.
Thank you for your help me. I was playing 5 days on my box arround. I was able to flash the TX3Mini-20181210.img to my MXQ PRO S905W with a s905xq4_v3.0 mainboard. Now i have a Tanix TX3Mini in a mxq pro 4k case. Boot logo is TX3 That’s crazy but everything works well 🙂
All the S905W have similar firmware. Crazy, yes.
Thank you very much!
I have some bricked s905w boxes marked as s905q4_V3.0 2018.10.16 the label on SD slot is ak1901-011 D1F8G S905W 20190109 01-B and this Tanix software compatible!
I try so many firmwares from img and SD card no one can be flashed due “Disk init error”.
Not only CPU need to be compatible in firmware. The NAND Flash matter too!
My box has Micron bga flash memory