FIRMWARE: Beelink SEA I with SoC Realtek RTD1295 v106

Today we share with you a new firmware for the TV-Box Beelink SEA I, this device that includes the SoC Realtek RTD1295 a Quad Core with ARM Cortex-A53 processors that integrates a Mali-T820MP3 GPU and that has among others automatic screen refresh change.  We also have 2GB of DDR4 RAM, 16 / 32GB eMMc storage, WIfi aC with internal antenna and Bluetooth 4.0. At the connectivity level, in addition to the internal SATA 3 port for 2.5″ disk between 7.5mm and 9.5mm, we find an SD card reader, USB 2.0 port, another USB 3.0 port, Gigabit network interface, input HDMI IN 2.0 that allows recording, HMDI 2.0 output up to 4k @ 60fps and SPDIF digital audio connector.The operating system is Android 6.0 with updates via OTA and includes an IR remote control.

• The Beelink SEA I TV Box can be purchased at Gearbest.com for around $92 ($ 98.99) for the model with 2GB of RAM and 16GB of storage memory and about $85 for model with 32GB of storage memory.

Update Process

• We can download the Firmware v106 for Beelink SEA I 16GB
• We can download the Firmware v106 for Beelink SEA I 32GB
• You can install it by following our Update Guide for SoC Realtek
  

Changelog

1.Qodi has been updated to 17.3
2.The mp4 output formating is available now in HDMI recording .
Pay attention to :
1.There is an AurtoReboot.apk in this tv box and you can start this apk when you press the button “8” of remote three times in the home interface , which is mainly used to test in the factory , you can just ignore it since it wouldn’t seen in the apk menu .