Teclast P10SE a new 10,1″ tablet for the low-cost sector

Today from Teclast we receive the announcement of a tablet called Teclast P10SE, a product aimed at the low-cost sector as we will see from its specifications. A model for those who are looking for a 10,1″ screen for basic and multimedia use.

This tablet has only 2 GB of RAM and for storage we have 32 GB. The SoC that mounts the basic range SoC Unisoc SC7731E, a quad core that has the old Cortex-A7 cores. Aesthetically, its metal body is more resistant than the usual plastic and its two speakers are placed on the sides.

teclast P10SE n00

SoC, RAM and storage

The Teclast P10SE is powered by the humble SoC Unisoc SC7731E, a 28 nm Quad Core with 4 ARM Cortex-A7 processors capable of reaching 1.3 GHz maximum speed, while the GPU is a Mali-T820. We also have integrated in the board 2 GB of LPDDR3 RAM and 32 GB of storage memory that we can expand thanks to the micro SD card reader included on the side.

Display and other specifications

The touch screen of this Teclast P10SE is a 10.1 inch IPS with HD+ resolution of 1280×800 pixels and with reduced frames within its range. A 0.3 MP camera with microphone is included on the top of the display to complement the 2 MP rear with flash. We also have Wifi connectivity, Bluetooth, GPS, FM Radio and it seems that we have a 3G modem with dual SIM although it is not specified. The battery is 5000 mAh with fast charge that theoretically would reach up to 6 hours of movies.

In the section of connectivity we have a 3.5 mm audio jack on the side and a USB Type-C for data and battery recharging. The audio also seems a little more careful than usual with the PureSound system with two speakers on the sides and the operating system installed is Android 10, which is a good thing.

Price and availability

  • The Teclast P10SE tablet will soon be available for purchase on Aliexpress.com and is expected to cost no more than $99 (€90).

teclast P10SE n01

Notify of
Inline Feedbacks
View all comments